R6A+ UT4H23 U/UTP CAT6A 4x2xAWG23/1 - unshielded - LSZH

SKU: M05B2834

U/UTP CAT6_A unshielded 4-pair cable (100 Ohm) with cross separator and non-conductive barrier tape, LSZH (Low Smoke Zero Halogen) flame and fire retardant jacket, tested up to 500 MHz. Suitable for the realization of 3^rd generation horizontal cabling of Class E_A.

Applications and performance

Cable suitable for the realization of generic cabling system according to EN 50173; ISO/IEC 11801.
Ideal for indoor applications in Class D, E and E_A up to 10 GbE over IEEE 802.3an and PoE/PoE+/PoE++ protocols. Electrical characteristics exceed CAT. 6_A requirements.

Reference standards

Force Technology approval for data transmission cables of Category 6A according to ISO/IEC 11801-1/2:2017; IEC 61156-5:2020 Ed.3; EN 50173-1/2:2018; EN 50288-11-1: 2012; ANSI/TIA-568-2.D, Alien crosstalk PS ANEXT and PS AACR-F parameters included.

Construction characteristics

Inner conductors - material/diameter	Solid bare copper/AWG 23/1 (0,55 mm)
Insulation - material/diameter	Solid PE max diam. 1,1 mm
Cable diameter	7,4 ± 0,3 mm
Barrier tape	Non-conductive tape + PET foil
Outer jacket material/colour	LSZH/Violet RAL 4005
Lead free	Yes
Cable weight	55 kg/km

Mechanical and environmental properties

Use	Indoor
Bend.radius during instalation	8 x outer diameter
Bend.radius after installation	4 x outer diameter
Max pull strength	110 N (11kg max.)
Installation temperature	from 0°C to +50°C
Operating temperature	from -10°C to +60°C

Fire behaviour

CPR Regulation	EN 50575
Fire behaviour	EN 50399 EN 60332-1-2; CEI 20-35/1-2
Acid gas emission	EN 60754-2; CEI 20-37/2-2
Smoke density	EN 61034-2; CEI 20-37/3-1

Electrical characteristics at 20°C

DC loop conductor resistance	18.5 Ohm/100m
Insulation resistance	5 GOhm x km
Mutual capacitance	56 pF/m
Capacitance unbalance	3300 pF/km
NVP nominal velocity of propagation	72%
Max. propagation delay	570 ns/100m
Characteristic impedance	100 ± 15 Ohm