Cable compliant with EN 50173 and ISO/IEC 11801 standards, designed for outdoor installations and underground deployment in suitable conduits.

Provides power and bandwidth over long-reach Ethernet connections up to 140 m at 1 Gbps, up to 200 m at 100 Mbps, and up to 220 m at 10 Mbps. Compatible with PoE, PoE+, and PoE++ applications.

Maximum distance may vary depending on the equipment used and the installation environmental conditions.

Data transmission cables of Category 6 according to ISO/IEC 11801; IEC 61156-5 Ed.2.1; EN 50173-1, ANSI/TIA-568.2-E.

• Conductor material/diameter Solid bare copper/AWG 22/1 (0,64 mm)
• Insulation material/diameter High density PE max diameter 1,18 mm
• Colour code/assembly 4 pairs: White-Blue/Blue, White-Orange/Orange, White-Green/Green, White-Brown/Brown
• Inner protection PET tape
• Rip cord Polyamide
• Filler PE cross type
• Cable diameter 6,9 ± 0,6 mm
• Outer jacket material/color PE / Colour Black RAL 9005
• Cable weight 47 kg/Km
• Printing M0502202 – CCS by QUBIX R6UT4PE22 Q-EXD U/UTP PE 4P 22AWG 100 OHM CAT.6 OUTDOOR ISO/IEC 11801 EN 50173 ANSI/TIA-568.2-E xxx/xx/xx (n° of lot/year/month) 000000 (progressive metric marking) m FID: XX – Euroclass Fca – DoP n° xxxxx

• Use Outdoor
• Bend radius during installation 8 x outer diameter
• Bend radius after installation 4 x outer diameter
• Max pull strength 110 N (11kg max.)
• Installation temperature From 0°C to +50°C
• Operating temperature From -10°C to +60°C

• CPR Regulations EN 50575 Euroclass Fca

• DC loop cond. resistance max. 13 Ohm/100m
• Resistance unbalance max. 5%
• Insulation resistance min. 5 GOhm x km
• Mutual capacitance 58 pF/m
• Capacitance unbalance max. 1600 pF/km
• NVP nominal velocity of propagation 69%
• Propagation delay max. 570 ns/100m
• Delay skew max. 45 ns/100m
• Characteristic impedance 100 ± 15 Ohm
• Dielectric strength 1,7 kVac for 2 sec

• 1000Base-T IEEE 802.3ab -2/2 V
• PoE IEEE 802.3af 44/57 V
• PoE+ IEEE 802.3at 50/57 V
• PoE++ IEEE 802.3bt 52/57 V